Hot Tub Covers

Hot Tub Covers

Three cover series, one promise: effortless protection that keeps the heat in and the weather out — from a slim folding lid to a full automated gazebo.

A hot tub cover is the biggest lever on running cost: a waterlogged cover accounts for 50–60% of heat loss and can double heating runtime. Replace covers every 5–7 years — when the cover feels heavier, sags, or smells of mildew. A good replacement has a 4″-to-3″ taper, 1.5 lb foam and a tight centre seal, and usually pays for itself within one to two winters.

Hot tub with automated cover
Meet the Series

Three Series, One Standard

Harbour Series automated gazebo cover
01 · Harbour Series

Automated Gazebo Cover

Our flagship cover. A full enclosure that opens at the touch of a button, with integrated LED ambient lighting and a walk-on lid — turning any hot tub into a private, glowing sanctuary.

  • Motorised one-touch opening
  • Integrated LED lighting
  • Walk-on load-bearing lid
  • R-16 sealed insulation
View Harbour Series →
Cove Series insulated dome cover
02 · Cove Series

Insulated Dome Cover

A sculpted, high-insulation dome with hydraulic lift assist. Streamlined and unobtrusive, it seals heat in while adding a clean, modern silhouette to the deck.

  • Hydraulic lift assist
  • Multi-layer thermal core
  • Weatherproof shell
  • Made to measure
View Cove Series →
Reef Series slim folding cover
03 · Reef Series

Slim Folding Cover

The smart, lightweight everyday option. A slim profile that folds neatly away, delivering dependable insulation and protection without the weight.

  • Lightweight, easy folding
  • Compact slim profile
  • Thermal foam core
  • Budget-friendly
View Reef Series →
Made to Measure

Custom-Built to Your Spa

There is no one-size-fits-all hot tub cover. Send us your spa’s outer dimensions and we cut, seal and fit your cover to the exact footprint — length, width and corner radius.

01

Measure

Send your spa model and outer dimensions.

02

Build

We cut, seal and finish to your exact footprint.

03

Fit

Delivered and fitted for a flush, weatherproof seal.

FAQ

Frequently Asked Questions

Which hot tub cover series should I choose?
Automated Gazebo for one-touch daily opening; Insulated Dome for the warmest, best-sealed fit; Slim Folding for a light, lower-cost cover. All three are made to measure for the spa model.
How do I measure for a replacement cover?
Give the exact spa model first — OceanFuture builds to the model. Without the model, give length, width, corner radius and skirt length, and photos of the spa from above.
How long does a hot tub cover last?
It depends on climate, use and care. Waterlogging, cracked vinyl and broken seams are the usual signs it is time to replace — a waterlogged cover also raises running costs sharply.
Can the cover be automated later?
Ask in the quote — automation depends on the cover series and the spa's cabinet and lifter setup. Confirm compatibility with the exact model before ordering.
Does the cover include a lifter?
Confirm in the quote whether a cover lifter or gazebo mechanism is included, and whether installation is needed.
How much does a hot tub cover cost?
Prices are quoted by cover series, size and destination. Use the quote form with the spa model and cover type.
How do I know my hot tub cover is waterlogged?
Pick it up: if it feels noticeably heavier than it did a few years ago, the foam has absorbed water and lost most of its R-value. Other signs are sagging in the middle, cracked or bleached vinyl, split seams, and a mildew smell. A waterlogged cover can account for 50–60% of the tub's heat loss.
How often should I replace a hot tub cover?
Every 5–7 years. Foam absorbs water slowly through its cut edges, so even a well-kept cover gets heavier and insulates worse over time. If the cover is heavy, sagging, or the lifter is straining, replace it rather than adjusting heater settings.

Find the Perfect Fit

Tell us your tub model and footprint for a tailored cover quote.

Request a Quote →